Maxitrol GV60 Advanced Troubleshooting page 40

QUESTIONS TO ASK
6. Has the knob not moved in 5 days?
7. Is the ON/OFF switch, located on the valve, in the ON
position?
8. Is the ON/MANUAL dial, located on the valve, in the ON
position?
9. Does it have a Voltage Module? If yes, did the receiver
overheat?
f i r e - p a r t s . c o m
Troubleshooting the GV60
POSSIBLE CAUSE
After 5 days of no movement the pilot will shut off.
— —
"O" = OFF; " " = ON
The dial must be fully turned to the ON position.
The fireplace goes to pilot if the receiver reaches 140°F.
© 2013, Maxitrol Company 40