Table of Contents
Advertisement
IR CONTROL SETTINGS
Under the R outing Control tab you will find settings for IR control. IR Routing by default listens to commands from the
supplied remote control, you can use alternative manufacturer profiles for integrating into existing systems or back-
wards compatibility.
Each output port can be configured to use a different IR profile, if "Default" is set, this is the profile used.
FRONT PANEL SETTINGS
Under the Front Panel tab you will find options for the front panel of the matrix such as turning off the status LEDs.
Note: The status LEDs are in the bottom right of the front panel, these LEDs will always appear during powerup and
turn off after 30 seconds if set to Off.
Advertisement
Table of Contents
Need help?
Do you have a question about the neo 4*4 Video Matrix and is the answer not in the manual?