Proper Measurement Position; Measuring Blood Pressure - Fora D40 DUO ultima Owner's Manual

Proper Measurement Position

1. Sit down for at least 10 minutes before measuring.
2. Place your elbow on a flat surface. Relax your hand with the
palm facing up.
3. Make sure the cuff is about the same height as the location of
your heart.
4. After the device is turned on, the cuff will begin to inflate automatically.
Remain still and do not talk or move during the measurement.

Measuring Blood Pressure

This device provides you two different ways to measure your blood pressure.
When the device detects an irregular heart beat, the pulse rate symbol is shown as
" " instead of "
Important!
Always apply the pressure cuff before turning on the device.
A. Single Measurement
Perform an individual blood pressure measurement.
1. Press . All the LCD symbols will appear. The cuff will begin to inflate automatically.
2. Press to turn the device off.
A pulse is detected.
Note:
• If the device is idle for 3 minutes, it will turn off automatically.
B. Average measurement
Automatically perform three (3) consecutive blood pressure measurements and
display the final average result.
1. Enter the Average mode.
Press " " the cuff will begin to inflate automatically.
2. After the first measurement is complete, the
device will start counting down before the second
measurement begins. The device will take three (3)
measurements consecutively with an interval of 20
or 60 seconds.
". If the problem still persists, please consult your doctor.
Displays the systolic pressure, diastolic
pressure, and pulse rate.
EN-7