Pure Clean PUCRCX70 User Manual page 15

Note:
• Make sure there is more than 0.5 meters on both sides of the charging
seat and more than 1.5 meters in front of it;
• The power cord hanging on the ground may be dragged by the device
causing power failure of the charging base;
• The charging indicator is always on when the battery is on;
3. Do not move the charging base at will to avoid
direct sunlight.
Note:
• If the position of charging base changes, the host may fail to locate;
• Sunlight will interfere with the recharging signal, which may cause the
host to fail to return to the charging seat;
4. A. In the working mode, when the power of the machine is too low, it
will automatically start to search the charging base for charging,
and then the purple light of the machine flashes;
B. Press the automatic recharge button on the remote control, and
the machine begins to search the charging base for charging.
Note:
During daily charging, pay attention to clean up the charging docking
electrode of the charging base Otherwise, the charging e ect will be
a ected.
www.PyleUSA.com
15