Start/Stop - Pure Clean PUCRCX70 User Manual

2. Start/stop

Standby mode: The power switch is turned on and the machine is
not moving.
Operation mode: Machine sweeping
A. Turn on the power and press the "start/pause" button on the
remote control on the robot.
B. When the machine is working properly, the red light on the button
" " will stay on.
C. When the machine is working properly, press the "
button to turn o the power, and it will stop.
Attention!
a. Whe the machine does not need to work, please turn o the power in
time.
b. The machine will not start cleaning when in manual charging.
Auto Recharge
1. Connect the power cord and
put the excess wire into the slot.
2. Place the charging base against
the wall on the level ground and
connect the power supply.
14
www.PyleUSA.com
More than 0.5m
More than 0.5m
" working
More than 0.5m