Maintenance; Battery Replacement; How To Clean The Product - Fluke 753 Calibration Manual

Maintenance

To prevent possible electrical shock, fire, or personal injury:
•
Have an approved technician repair the Product.
•
Do not operate the Product with covers removed or the case open.
Hazardous voltage exposure is possible.
•
Remove the input signals before you clean the Product.
•
Use only specified replacement parts.

Battery Replacement

Replace the battery when it no longer holds a charge for the rated interval. The battery
normally lasts for up to 300 charge/discharge cycles. To order a replacement battery, see
"Contacting Fluke" and "Replaceable Parts".
Spent batteries should be disposed of by a qualified recycler or hazardous
materials handler. Contact an authorized Fluke Service Center for
recycling information.

How to Clean the Product

Clean the Product and pressure modules with a soft cloth dampened with water or water
and mild soap.
To prevent possible damage to the Product, do not use
solvents or abrasive cleansers.
XWWarning
Note
WCaution
Documenting Process Calibrator
Maintenance
35