Checklist - Pine Technology PT-730A User Manual

"FCC Approval"
The PT-730A motherboard has been approved for FCC Class B when properly installed in a
barebone configuration using the following case/power supply:
Brand
Procase
Procase
Procase
FCC Notice:
Information to the User
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
television reception then the user is encouraged to try to correct this interference by one or more of
the following measures:
 Re-locate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
 Consult the dealer or an experienced radio/TV technician for help and for additional suggestions.
The user may find the following booklet prepared by the Federal Communications Commission helpful:
"How to identify and Resolve Radio-TV Interference Problems." This booklet is available from the US
Government Printing Office, Washington, DC20402, Stock No. 004-000-00345-4.
FCC Warning
The user is cautioned that changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate this equipment.
Note:

1.2 Checklist

Please check your PT-730A package to ensure that it contains the following items :
 PT-730A Main Board
 PT-730A User's Manual
 PT-730A Enhanced IDE Driver Diskette
 40-way flat cable 2 pieces
If any of these items are missing or damaged, please contact your local dealer or sales representative
for assistance.
Model
PC-109 SM JPJPINE429G109
PC-609 T/M JPJPINE429G609
PC-709 T/M JPJPINE429G709
In order for an installation of this product to maintain compliance with
the limits for a Class B device, shielded cables and power cord must be
used.
FCC ID
Should you experience interference to radio or
6