Pine Technology PT-730A User Manual page 11

shown. Should you wish to use an external battery, pull off the jumper and ensure that the "+" and "-
" of the external battery pack cable are correct as shown.
CN2: Reset Switch
OPEN Normal
SHORT Reset
For the system reset switch on your system case.
Connect the cable here.
CN3: Speaker Connector
1 Speaker data
2 NC
3 Ground
4 + 5V
Connect the speaker cable from your system case here.
CN4: Turbo Switch
OPEN Turbo speed
CLOSE Normal speed (soft-key
disabled)
Connect the turbo switch cable from your system case here.
CN5: Turbo LED Connector
1 LED anode
2 LED cathode
Connect the TURBO LED from your case to here.
11