Table of Contents
Advertisement
This motherboard can use a FLASH ROM in order to
change the system BIOS through software. This allows
you to constantly update your system BIOS as changes
are made. Should you wish to use this feature then you
must set this jumper according to the voltage of that
FLASH ROM. Default is no connection because the PT-
730A uses only a EPROM as its standard feature. When
using FLASH ROM a Flash Memory Writer Utility
software driver is required.
please contact your dealer or sales representative.
JP6:
Power Saving Switch
Press one time to go in suspend mode
Press another time to go back normal mode
Some system cases will also have a cable for a switch on
the case front which when pressed will automatically put
the system in to / and out of 'suspend' mode.
that cable here .
JP7:
CPU Type Select
OPEN
Write Back CPU
SHORT
Write Through CPU
This motherboard has been designed to work with both
Write Back & Write through type of CPU.
according to the type of CPU used
JP9,JP10,JP11,JP12 : Cache Size Select
JP9
256K
OFF
512K
ON
1024K
ON
This selects the size and type of cache ram on the
motherboard.
This motherboard can work with three types of cache ram
which
allows for extra flexibility should you wish to upgrade.
The jumpers will be set accordingly during production.
U18,U19,U20,U21,U22,U23,U24,U25 is the DATA RAM.
For details on this driver
JP10
JP11
JP12
OFF
OFF
OFF
OFF
ON
OFF
ON
ON
ON
13
Connect
Set this
SRAM
8K8 X 8
64K8 X 4
128K8 X 8
Advertisement
Table of Contents
