Pine Technology PT-730A User Manual page 31

Video Off Method
DPMS Support
Blank Screen
V/H SYNC+Blank
HDD Standby Timer
Select time-out value 1-15 minutes for IDE with disk auto standby. This function depends on disk drive,
some older mode disk drives don't support auto standby function. System BIOS set this function before
booting if HDD supported.
Doze Timer Select
Set the length of time of PT-730A inactivity that must be expired before PT-730A is placed in Doze
mode.
Standby Timer Select
Set the length of time of PT-730A inactivity that must be expired before PT-730A is placed in Standby
mode.
Inactive Timer Select
Set the length of time of PT-730A inactivity that must be expired before PT-730A is placed in Inactive
mode.
Mode Control
Set the CPU speed at power saving modes Doze Mode, Standby Mode, and Inactive Mode and set
whether the Display should be on or off at these modes.
Doze Mode
Set Doze Mode speed and set the status of the Display.
Standby Mode
Set Standby Mode speed and set the status of the Display.
Inactive Mode
Set the frequency of Inactive Mode and set the status of the Display.
support DPMS power saving
blank the screen at power saving mode
blank the screen and stop the CRT scanning at power saving mode
31