Table of Contents
Advertisement
PCI IRQ Actived By
This option sets the PCI IRQ signal trigger method.
PCI IDE Controller
This option enables or disables on-board PCI IDE controller.
PCI IDE IRQ Map To
PCI-AUTO :
ISA
:
IDE Primary Master PIO
This option specifies the hard drive mode of primary master or set to auto-detection.
IDE Primary Slave PIO
This option specifies the hard drive mode of primary slave or set to auto-detection.
IDE Secondary Master PIO
This option specifies the hard drive mode of secondary master or set to auto-detection.
IDE Secondary Slave PIO
This option specifies the hard drive mode of secondary slave or set to auto-detection.
WakeUp Event In Inactive Mode
These option set up which means are used to wake up the system from Inactive Mode to Normal Mode.
The BIOS will :
- scan for PCI IDE devices & determine the location of the PCI IDE device
- assign IRQ 14 for the
IRQ 15 for the secondary IDE INT#
- assign IRQ 14 for the primary IDE device
assign IRQ 15 for the secondary IDE device
The BIOS will not assign any IRQs even if PCI IDE card is found because some IDE
cards connect the IRQ 14 & 15 directly from ISA slot through a Legacy Header.
primary IDE INT#
34
Advertisement
Table of Contents
