Pci/Green Function Setup - Pine Technology PT-730A User Manual

3.7 PCI/Green Function Setup

Slot 1 Using INT#
Slot 2 Using INT#
Slot 3 Using INT#
1st Available IRQ
2nd Available IRQ
3rd Available IRQ
4th Available IRQ
PCI IRQ Actived By
PCI IDE Controller
PCI IDE IRQ map To
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master PIO : AUTO
IDE Secondary Slave PIO
Slot 1 Using INT#
Slot 2 Using INT#
Slot 3 Using INT#
AUTO : BIOS will -ask the PCI device which INT(A-D) does it want to use for interrupt
A,B,C,D : these options are reserved for Dirty cards from which the system BIOS cannot tell
which INT does it use.
IRQs for PCI slots
The options "1st Available IRQ," "2nd Available IRQ," "3rd Available IRQ," and "4th Available IRQ"
specify which available IRQs will be assigned by the System BIOS to the found PCI devices.
ROM PCI / ISA BIOS (2A5X7PCH)
PCI/GREEN FUNCTION SETUP
AWARD SOFTWARE, INC.
: AUTO
: AUTO
: AUTO
: 10
: 11
: 9
: 12
: Edge
: Enabled
: ISA
: AUTO
: AUTO
: AUTO
-check out which IRQ is available from the above
-tell the device which IRQ has been assigned to it
* WakeUp Event In Inactive Mode
Monitor IRQ3 Wake Up
Monitor IRQ4 Wake Up
Monitor IRQ5 Wake Up
Monitor IRQ6 Wake Up
Monitor IRQ7 Wake Up
Monitor IRQ8 Wake Up
Monitor IRQ9 Wake Up
Monitor IRQ10 Wake Up
Monitor IRQ11 Wake Up
Monitor IRQ12 Wake Up
Monitor IRQ13 Wake Up
Monitor IRQ14 Wake Up
Monitor IRQ15 Wake Up
ESC : Quit
F1 : Help
F5 : Old Values
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
33
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
   : Select Item
PU/PD/+/- : Modify
(Shift) F2 : Color