Mounting Cut-Out; Demounting - Bosch Rexroth IndraControl VDP 15.3 Multi Touch Operating Instructions Manual

Table of Contents

10.4 Mounting cut-out

①

Mounting cut-out

Fig. 10-6: Mounting cut-out, specifications in millimeters

1. Disconnect the operator display.

2. Remove all connected cables.

3. Loosen the screws of the clamp fastenings.

4. Fold in the clamp fastenings.

5. Press the latching lug of the installation aid.

Fig. 10-7: Latching lug

6. Remove the operator display from the mounting frame.

DOK-SUPPL*-VDPXX.3MTBU-IT03-EN-P

Mounting, demounting and electric installation

535 mm (VDP 21.3)

473 mm (VDP 18.3)

403 mm (VDP 15.3)

Bosch Rexroth AG

21/37

Table of Contents

Do you have a question about the Rexroth IndraControl VDP 15.3 Multi Touch and is the answer not in the manual?