About This Documentation; Overview On Target Groups And Product Phases; Purpose - Bosch Rexroth IndraControl VDP 15.3 Multi Touch Operating Instructions Manual

1 About this documentation

Editions of this documentation
Edition Release
Date
Edition 01 2013-10
Edition 02 2014-03
Edition 03 2018-05
Tab. 1-1: Change Record

1.1 Overview on target groups and product phases

In the following illustration, the framed activities, product phases and target
groups refer to the present documentation.
Example: In the product phase "Mounting (assembly/installation)", the "mechan-
ic/electrician" can execute the activity "install" using this documentation.
Product
Selection
phases
Presales Aftersales
Design engineer
Programmer
Technologist
Target
Process
groups
specialist
Select
Prepare
Activities
Design
Construct
Fig. 1-1: Assigning the present documentation to the target groups, product phases and ac-
tivities of the target group

1.2 Purpose

This document instructs the technical staff of the machine manufacturer on how
to perform the mechanical and electrical installation safely and on how to com-
mission the device.
DOK-SUPPL*-VDPXX.3MTBU-IT03-EN-P
Notes
First edition
Revision
Accessories supplemented, corrections
Mounting
Engineering
(assembly/installation)
Mechanic/
electrician
Commissioning engineer
Unpack Parameterize
Mount Program
Install Configure
Simulate
About this documentation
Commissioning Operation
Programmer
Technologist
Process specialist
Machine
operator
Maintenance
technician
Service
Optimize Operate
Test Maintain
Remove
Create
the NC program
Bosch Rexroth AG
Decommissioning
Mechanic/
electrician
Disposal company
Dismount
Dispose
faults
1/37