Table of Contents
Advertisement
Bosch Rexroth AG
Mounting, demounting and electric installation
Fig. 10-5: Clamp fastening
4. Tighten the clamping screws.
NOTICE
Tighten the screws and nuts with the corresponding tightening torque according
to the following table.
Thread
M2,5
M3
M4
M5 (clamping screws)
Tab. 10-1: Tightening torques
20/37
Damage to the mechanics caused by wrong
tightening torque
Mounting torque
0.4 Nm
0.7 Nm
1.4 Nm
1.0 Nm
DOK-SUPPL*-VDPXX.3MTBU-IT03-EN-P
Advertisement
Table of Contents
Need help?
Do you have a question about the Rexroth IndraControl VDP 15.3 Multi Touch and is the answer not in the manual?
Questions and answers