Connect To Controller And Synchronize - Assa Abloy Lockwood Standalone User Manual And Instructions

Lockwood Standalone
User manual and Instructions

4.1.1.1 Connect to Controller and synchronize:

 Click "Connect to Controller and Synchronize" button, to connect and store user details into
Controller. Refer figure 7.
 Enter "Password" to connect to controller. Note down the password in safe location. If no
password is required leave blank
 If user forgets the password, use "Forget Password?" option as shown in figure 11, and enter serial
number of the controller (number is located on the module and at the back of PCB Board) and
click "OK" button.
 Select "Yes" button, which will erase all data and settings except date and time.
 Refer figure 7, 10, 11, 12.
V1.0
Figure 9: New Installation - Add User Information Window
Figure 10: Controller Password
8 (23)