Related Manuals for Southern Enterprises Barksdale KA326400TX
Summary of Contents for Southern Enterprises Barksdale KA326400TX
- Page 1 KA326400TX Barksdale 3pc Breakfast Set Assembly Instructions For assistance with assembly, contact: Southern Enterprises, Inc. Customer Service: 1-800-633-5096 service@seidal.com www.seifurniturestore.com PO： Page 1...
- Page 2 Barksdale 3pc Breakfast Set Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like carpet or a blanket. Check that you have all parts indicated. Call customer service if any hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures.
- Page 3 Quantity Quantity Quantity of 2 of 12 of 1 Connecting bar Stool Side rail Drawer Quantity Quantity Quantity of 2 of 2 of 22 Basket Frame Basket Bottom Panel Short Bolt \Φ1/4"*1-1/4"L Quantity Quantity Quantity of 32 of 24 of 22 Φ1/4"*1-1/2"L Long Bolt Flat Washer...
- Page 4 Barksdale 3pc Breakfast Set Assembly Instructions Line up Right Side Frame (B) and Center Frame (C) to Fixed Shelves (H) and Connecting Bars (J). Figure 1 Secure Center Frame (C) and Right Side Frame (B) to Fixed Shelves (H) using Short Bolts (1), Spring Washers (5), and Flat Washers (4).
- Page 5 Attach the assembled unit to Bottom Panel (G), Left Side Panel (D), and Back Panel (I) using Short Bolts (1), Spring Washers (5), and Flat Washers (4). Tighten Bolts (1) with Allen Wrench (6). Figure 3 Line up the assembled unit with Top Panel (A).
- Page 6 Attach assembled unit to Top Panel (A) using Short Bolts (1), Spring Washers (5), and Flat Washers (4). Tighten Bolts (1) with Allen Wrench (6). Figure 5 Turn the assembled table over. Insert pre-assembled drawer (L). Make sure drawer smoothly slides in and out.
- Page 7 Open the folding Basket Frame (M). Figure 7 Insert Basket Bottom panel (N) into Basket Frame (M). Figure 8 Page 7...
- Page 8 Place the assembled baskets on Fixed Shelves (H). Figure 9 Now the table is ready to use. Figure 10 Page 8...
- Page 9 Attach Stool Side Frames (F) to Stool Side Rails (K). Insert Nuts (3) into pre-drilled holes on Stool Side Rails (K). Insert Long Bolts (2) through pre-drilled holes on Stool Side Frames (F) into Nuts (3). Tighten Long Bolts (2) with Allen Wrench (6).
- Page 10 Attach the assembled unit to Seat Panel (E), using Long Bolts (2). Tighten Bolts (2) with Allen Wrench (6) Figure 13 Turn the assembled stool over and it is ready to use. Repeat steps 11-14 for 2 stool. Figure 14 Page10...
- Page 11 When desired, place assembled stools under assembled table for storage. Figure 15 Page11...
-
Page 12: Parts Replacement Form
For product issues, please contact Southern Enterprises at 800-633-5096 (toll-free) / 972-869-0111 (Dallas), Mon-Fri 9am – 4pm CST, or email us at service@seidal.com. Please ask for customer service representative for issues involving damages or replacement parts.
Need help?
Do you have a question about the Barksdale KA326400TX and is the answer not in the manual?
Questions and answers