Table of Contents
Related Manuals for Southern Enterprises EN810100TX
Summary of Contents for Southern Enterprises EN810100TX
- Page 1 EN810100TX Aspen Floating Shelf 10" Chocolate EN810200TX For assistance with assembly contact: Aspen Floating Shelf 10" Black Southern Enterprises Inc. Customer Service 1-800-633-5096 Assembly Instructions service@seidal.com www.seidal.com Max loading weight:20lbs...
- Page 2 Aspen Floating Shelf 10" 111-100 CHICAGO FLOATING SHELF 10" BLACK Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures.
- Page 3 Aspen Floating Shelf 10" Assembly Instructions Place the Mounting Bracket (B) against wall at desired location with arrow pointing up. Place level on top of bracket to insure bracket is level. Mark each hole with a pencil. Remove bracket. Tip: If mounting to sheet rock (cavity wall) it is advisable to mount at least one screw Figure 1...
- Page 4 Slide the Shelf (A) onto Mounting Bracket (B) by aligning the two holes on Shelf (A) to poles on Bracket (B), making sure the two small holes are pointing down on bottom of Shelf (A). Figure 3 Insert two Long Screws (E) with a screwdriver to secure Shelf (A) to Bracket (B).
- Page 5 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise. Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central Time if you have product issues or email us at service@seidal.com. Please ask for customer service representative for issues involving damages or replacement parts.
- Page 6 CAUTION Max shelf load capacity is achieved by mounting screw into studs or cement walls. If mounting to sheet rock (cavity wall) it is advisable to mount at least 1 screw (without anchor) directly to a wall stud or studs. However, do not leave either end of mounting bracket unsupported by at least one anchor.
Need help?
Do you have a question about the EN810100TX and is the answer not in the manual?
Questions and answers