de
Cleaning and maintenance
3.
Clean the drain hose and the
siphon socket.
4th
Reattach the drain hose and secure
the connection point with the hose
clamp.
The filter at the water inlet is
clogged
Reduce the water pressure in the inlet
hose:
1.
Turn off the tap.
2.
Select any program (except the
programs Rinse
len) à, 0 Spin, [Drain].
3.
The key A.Start / Reload (Start /
Reload) Select. Let the program run
for about 40 seconds.
4th
Open the program selector Off
to adjust.
5.
Pull out the power plug.
Clean the sieves:
1.
Remove the hose on the back of the
device.
46
2.
Remove the sieve with a pair of tongs.
3.
Clean the sieve with a small brush.
4th
Connect the hose and check for leaks.