Table of Contents
Advertisement
Align
Align the device using a spirit level.
Incorrect alignment can lead to loud
noise, vibrations and "wandering" of the
device.
1.
Loosen the lock nuts with a wrench in a
clockwise direction.
2.
Check the alignment of the device with a
spirit level, correct if necessary.
Change the height by turning the
device base.
All four feet of the device must be
firmly on the floor.
Positioning and connecting
3.
Tighten the lock nut against the
housing.
Hold the foot firmly and do not adjust
the height.
The lock nuts of all four device feet
must be screwed tightly against the
housing!
Electrical connection
:
warning
Risk of death!
Contact with live parts creates the risk
of electric shock.
Never touch the power plug with wet
■
hands.
Always pull the power cable by the
■
plug and never by the cable, as it could
be damaged.
Observe the following notes and make
sure that:
Hints
The mains voltage and voltage
■
specification on the device (device
label) match.
The connection value and the
required fuse are specified on the
device label.
The device is only connected to
■
alternating current via a properly
installed protective contact socket.
The mains plug and socket match.
■
the earthing system has been installed according to
■
regulations.
de
19th
Advertisement
Table of Contents
