Table of Contents
Advertisement
4.3 Requirements for the
installation location
DANGER!
If the device is tilted beyond 40°,
residual water in the device may leak
and cause property damage.
Tilt the device carefully.
▶
Transport the device standing up.
▶
Freezing residual water in the device
can lead to device damage.
Do not set up and operate the
▶
device in areas at risk of frost or
outdoors.
If the device is operated immediately
after transport, the coolant contained
in the device can cause damage to the
device.
Immediately after transport, let the
▶
device rest for two hours before
putting it into operation.
Installation location
On the footboard
the
Requirements
Place the device on a
clean, level surface
place on a solid
surface.
Turn off the device
judge
→ Page 16 .
Setting up and connecting
Installation location
In a laundry
Dry column
On a wall
4.4 Water drain hose
During drying, condensation is
created, which your device collects in
the condensation container at the
factory. Use the water
Requirements
This device only
with the original
len connection
set of drying
manufacturer in
a washing dryer
cken column on
place.
¡connection
set with
pullable arm
work plate
→ Page 32
¡connection
→ Page 32
sentence
This device only
on a washing machine
machine from
same manufacturer
lers. The
Depth and breadth
of this device
have to with the
Dimensions
the washing machine
machine match
voices.
The washing dryer
cken column not
on a pedestal
place.
No hoses
and mains connection
final line
between wall
and device on
clamp.
de
13
Advertisement
Table of Contents
