Control Panel - Zanussi ZRB935NW User Manual

Environment Protection
This appliance does not contain gasses which could
damage the ozone layer, in either its refrigerant cir-
cuit or insulation materials. The appliance shall not be
discarded together with the urban refuse and rubbish. The

Control panel

1
1 ON/OFF switch
2 Freezer temperature regulator
3 Temperature selection button
4 Display
Display
1
2
3
1 Ambient indicator
2 Refrigerator compartment indicator
3 Freezer compartment indicator
4 Temperature display
5 Fast Freeze indicator
6 Excessive temperature indicator
7 Shopping indicator
Switching on-off
To switch on the appliance do these steps:
1. Insert the plug into the wall socket.
2. Push the ON/OFF switch. The backlight of the display
turns on.
To switch off the appliance do these steps:
1. Push the ON/OFF switch again.
28
insulation foam contains flammable gases: the appliance
shall be disposed according to the applicable regulations
to obtain from your local authorities. Avoid damaging the
cooling unit, especially at the rear near the heat exchang-
er. The materials used on this appliance marked by the
symbol
2 3
5 Function menu
Alarm reset switch
6 Fridge temperature regulator
4
2. Disconnect the mains plug from the mains socket.
Function menu
Used to select the super cooling and shopping modes.
The modes are available as follows, pressing Function
button once or more times:
• Normal mode (default)
• Fast Freeze mode
• Shopping mode
• Normal mode
The same button is used to reset acoustic alarm signal.
Temperature display
By default the temperature display shows the ambient
temperature and the ambient indicator is on.
are recyclable.
4 5 6
5
7
6