, as this could cause skin abrasio- stuff and/or beverages in a normal house- ns or frost/freezer burns. hold as explained in this instruction Avoid prolonged exposure of the appliance booklet. to direct sunlight. Do not use a mechanical device or any ar- www.zanussi.com...
Page 3
"Max", just turn the switch to "normal". You switch on your appliance by connecting it to Knob your mains supply and setting the thermostat, the thermostat control knob is located at the top. www.zanussi.com...
These are normal operating sounds. You may hear a faint gurgling and a bubbl- ing sound when the refrigerant is pumpd When the compressor is on , the refrigerant is being pumped around and you will hear www.zanussi.com...
The appliance is near a heat source. location section. Interior light does Light bulb is defective. not work Appliance is not level. Re-adjust the feet. Unusual noises The appliance is touching the Move the appliance slightly. wall or other objects. www.zanussi.com...
Positioning +16 C to +32 C Install this appliance at a location where the ambient temperature corresponds to the climate +16 C to +38 C class indicated on the rating plate of the appliance: +16 C to +43 C www.zanussi.com...