Recycler Blade - Toro 134-4277 Installation Instructions Manual

8
Installing the New Blades
Parts needed for this procedure:
3

Recycler blade

Procedure
WARNING
The blades are sharp. Contact with a sharp
blade can cause serious personal injury.
Wear gloves or wrap the sharp edges of the
blade with a rag.
Refer to the Operator's Manual for instructions on
installing the blades.
9
Installing the Belt Covers
and Sheet-Metal Guard
No Parts Required
Procedure
1. Secure the sheet-metal guard using the 4 bolts
(Figure 2).
2. Secure the belt covers (Figure 1).
10
Converting the Mower
Deck for Rear-Discharge
Operation
Parts needed for this procedure:
8 Flange-head bolt (3/8 x 1 inch)
Preparing to Remove the Recycler
Kit
1. Prepare the mower; refer to
Machine (page
2. Remove the belt covers and sheet-metal guard;
refer to 2 Removing the Belt Covers and
Sheet-Metal Guard (page
3. Remove the recycling blades; refer to the
Operator's Manual for your machine.
9
1 Preparing the
2).
2).