Toro 134-4277 Installation Instructions Manual page 3

2
Removing the Belt Covers
and Sheet-Metal Guard
No Parts Required
Procedure
1. Remove the belt covers
Left belt cover shown
2. Loosen the 4 bolts and remove the sheet-metal
guard (Figure 2).
(Figure 1).
Figure 1
1. Sheet-metal guard
3
g345273
Removing the Existing
Blades
No Parts Required
Procedure
WARNING
The blades are sharp. Contact with a sharp
blade can cause serious personal injury.
Wear gloves or wrap the sharp edges of the
blade with a rag.
Refer to the Operator's Manual for instructions on
removing the blades.
3
Figure 2
2. Bolt
g192921