Table of Contents
Advertisement
Removing the Baffle Supports
Reverse the steps in
5 Installing the Baffle Supports (page 5)
(5/16 x 7/8 inch) and locknuts (5/16 inch) where you removed the baffle supports as shown in
1. Carriage bolt (5/16 x 7/8 inch)
2. Locknut (5/16 inch)
Finishing Converting the Mower Deck for Rear-Discharge Operation
1.
Install the non-recycling blades; refer to the Operator's Manual for your machine.
2.
Install the belt covers and sheet-metal guard; refer to
Guard (page
2).
and install the previously removed carriage bolts
Figure 9
3. Deflector bracket
2 Removing the Belt Covers and Sheet-Metal
11
Figure
9.
g345330
Advertisement
Table of Contents
