Table of Contents
Advertisement
Removing the Kickers
Reverse the steps in
7 Installing the Kickers (page 8)
previously removed locknuts (3/8 inch) where you removed the kickers.
Refer to
Figure 8
for the holes you need to fill in the mower deck.
Removing the Baffles
Reverse the steps in
6 Installing the Baffles (page 6)
previously removed locknuts (3/8 inch) where you removed the baffles.
Refer to
Figure 8
for the holes you need to fill in the mower deck.
1. Install the new flange-head bolts (3/8 x 1 inch) and previously removed locknuts (3/8 inch) in these holes.
2. Remove the centre baffle support bracket only and secure the existing fitted flange-head bolts (5/16 x 1 inch) and shim plate using
the previously removed locknuts (5/16 inch).
and install new flange-head bolts (3/8 x 1 inch) and
and install new flange-head bolts (3/8 x 1 inch) and
Figure 8
10
g371885
Advertisement
Table of Contents
