Table of Contents
Advertisement
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
8
9
10
1
Preparing the Machine
No Parts Required
Procedure
1.
Park the machine on a level surface.
2.
Move the motion-control levers to the
N
-L
position.
EUTRAL
OCK
3.
Engage the parking brake.
Description
No parts required
No parts required
No parts required
No parts required
No parts required
Flange-head bolt (3/8 x 1 inch)
Qty.
-
Prepare the machine.
Remove the belt covers and sheet-metal
-
guard.
-
Remove the existing blades.
-
Drill the mower deck.
1
1
1
4
Install the baffle supports.
2
6
1
1
1
1
Install the baffles.
9
9
3
6
Install the kickers.
6
3
Install the new blades.
Install the belt covers and sheet-metal
-
guard.
Convert the mower deck for
8
rear-discharge operation.
4.
Shut off the engine and remove the key.
5.
Thoroughly clean the mower deck. Remove all
debris to ensure that the baffles will fit properly.
6.
Repair all bent or damaged areas of the mower
deck and replace any missing parts.
2
Use
Advertisement
Table of Contents
