Transfer A Call; Voice Messages; Hunt Groups - Cisco 3905 Using Manual

•
Your co-worker's phone rings and the line button flashes amber.
•
If you answer the call:
•
Your line button turns green.
•
Your co-worker's line button turns red.
When button is red, that line cannot be used to barge in on the call or used to make
another call.
•
If you put the call on hold:
•
Your line button flashes green.
•
Your co-worker's line button flashes red.
When the line flashes red, your co-worker can pick up the call.

Transfer a Call

Transfer allows you to redirect a connected call from your phone to another number.
Step 1
Press Transfer button
Press the Transfer button the second time to finish the transfer.
Step 2

Voice Messages

Voice messages are stored on your voicemail system. Currently this feature is not available

Hunt Groups

Hunt Groups are used to share the call load in organizations that receive a large number of
incoming calls.
Your system administrator sets up a hunt group with a series of directory numbers. When the first
directory number in the hunt group is busy, the system hunts for the next available directory
number in the group and directs the call to that phone.
If you are a member of a hunt group, you sign in to a hunt group when you want to receive calls,
and you sign out of the hunt group when you want to prevent calls from ringing on your phone.
ISO 9001:2015 Certified
Procedure
to put the first call on hold and initiate a new call.
................................Soaring Heights in Transforming Industry and Economy