Adjust The Handset Rest - Cisco 3905 Using Manual

Footstand
The Cisco Unified IP Phone 3905 has a foldable footstand. When the footstand is unfolded, it
gives the phone an elevated viewing angle.

Adjust the Handset Rest

If your phone is wall-mounted, you may need to adjust the handset rest to ensure that the
receiver does not slip out of the cradle.
Procedure
Step 1 Remove the handset from the cradle and pull the plastic tab from the handset
rest.
Step 2 Rotate the tab 180 degrees.
Step 3 Hold the tab between two fingers, with the corner notches facing you.
Step 4 Line up the tab with the slot in the cradle and press the tab evenly into the slot.
An extension protrudes from the top of the rotated tab.
ISO 9001:2015 Certified ................................Soaring Heights in Transforming Industry and Economy