Advertisement
Quick Links
Advertisement
Related Manuals for WATSON Watson Pin & Tak Deskmount Acrylic Screen
Summary of Contents for WATSON Watson Pin & Tak Deskmount Acrylic Screen
- Page 1 ASSEMBLY Watson Pin & Tak Deskmount Acrylic Screen 360.394.1300 watsonfurniture.com V.1.00 06/2020...
- Page 2 Acrylic Deskmount Screen Basic Components Side Screen Back Screen Brackets Medallions 2 ACRYLIC DESKMOUNT SCREEN ASSEMBLY INSTRUCTIONS...
- Page 3 Hardware ¼-20 Lock Nut, Square Dr ive T hread Cut t ing 5/18-18x1”Clamping Zinc ( 090770 Screw #8x1 3/4” ( 0000238 ) Screw ( 0000229 ) Tools Elec t r ic Dr ill Phillips Dr ill/Dr iver Bit 2mm Hex Dr ill/Dr iver 3mm Hex Dr ill/Dr iver Addit ional tools such as a 90 Degree Bit and an 18”...
- Page 4 Position Medallions Press Medallion plates into holes in acrylic until flush. Consult visual to determine orientation for Desk and Side Screen. NOTE: Medallion orientation depends on Screen type ↑ UP ↑ ↑ UP ↑ Side Screen Back Screen Side Screen Shown Secure Brackets Position mountion brackets onto the studs sticking through the board and secure into place with nylon-lock nuts (090770).
- Page 5 Insert Clamping Screw For 90 edges, the clamping screw (0000229) can be attached by screwing into the threaded hole on the back internal of the bracket. The screw should have atleast 3/4” clearance from top of bracket. 5/18-18x1”Clamping Screw ( 0000229 ) Attaching to Desk Slide screen onto desk until bracket is flush with edge.