Installing Your Air Conditioner - Russell Hobbs RHPAC11001 Manual

INSTALLING YOUR AIR
Exhausting Hot Air
In the COOL mode the appliance must be placed close to
a window or opening so that the warm exhaust air can be
ducted from outside.
First position the unit on a flat floor and make sure there
is a minimum of a 45cm (18inch) clearance around the
unit and ensure this is within the vicinity of a plug socket.
1. Extend either side of the hose (Fig. 1) and screw on the
hose inlet (Fig. 2).
2. Extend the other side of the hose and screw it into the
hose outlet (Fig. 3)
3. Install the hose inlet into the unit (Fig. 4)
4. Affix the hose outlet into the window seal kit and zip.
RHPAC11001
CONDITIONER
v2.5 9