Installing Your Air Conditioner - Russell Hobbs RHPAC4002 Manual

INSTALLING YOUR AIR
Exhausting Hot Air
In the COOL mode the appliance must be placed close to a
window or opening so that the warm exhaust air can be ducted
from outside.
First position the unit on a flat floor and make sure there is a
minimum of a 45cm (18inch) clearance around the unit and
ensure this is within the vicinity of a plug socket.
1. Extend either side of the hose (Fig. 1) and screw on the hose
inlet (Fig. 2).
2. Extend the other side of the hose and screw it into the hose
outlet (Fig. 3)
3. Install the hose inlet into the unit (Fig. 4)
4. Affix the hose outlet into the window seal kit and seal
RHPAC4002
CONDITIONER
v2.4 9