Troubleshooting - Russell Hobbs RHPAC11001 Manual

PROBLEM
The appliance does
not come on
The appliance works
for a short time only
The following
message appears on
the display:
LT/PF/FT
RHPAC11001

TROUBLESHOOTING

-There is no current
-It is not plugged into
the mains
-The internal safety
device has tripped
-There are bends in
the air exhaust hose
-Something is
preventing the air
from being
discharged
-The appliance has a
self-diagnosis system
to identify a number
of malfunctions
CAUSE
v2.5
SOLUTION
-Wait
-Plug it into the
mains
-Wait 30 minutes
and if the problem
persists please
contact our
Customer Service
team on 0345 209
7461.
-Position the air
exhaust correctly,
keeping it as short
and free of curves as
possible.
-Check and remove
and obstacles
obstructing the air
discharge.
-See the SELF-
DIAGNOSIS section
of this booklet
27