Air Filter(S) - Russell Hobbs RHMA 050 Instructions And Warranty

Sleep mode
The sleep mode function adjusts the set temperature of the unit to the thermal needs of the
body falling asleep as follow:
• Default fan speed: LOW
• Press the -button to operate the sleep mode. Press the -button again in order to cancel
the sleep mode.
The set temperature will increase 1°C after 1 hour and a further 1°C after 2 hours.
• No FAN mode under SLEEP mode operation.
Dehumidification
If the unit will be used mainly as a dehumidifier just let the warm air return in the room.
Continuous drainage (see separate chapter) is then necessary and more efficient.
AIR FILTERS
This air conditioner is equipped with two filter sets:
1. A multi layer filter in the upper air inlet, to clean the circulated room air, which includes
a. A screen filter, to remove dust particles.
b. An active carbon filter, to remove odours.
c. 3M™ High Air Flow filter; to remove unhealthy particles from the air such as pollen,
bacteria, animal dander and dust.
If you wish to purchase a replacement, call Amalgamated Appliance (Pty) Ltd for details.
2. A screen filter in the lower air inlet, to remove dust particles.
NOTE! The active carbon filter and the 3M™ High Air Flow filter are delivered in a plastic packaging. Don't
forget to install these filters. These filters take away unhealthy particles out of the room environment.
The filter holder on the rear of the unit can be opened. The active carbon filter and 3M™ High Air Flow
filter can be installed or removed. The screen filter is part of the filter holder (see illustration).
a. The screen filter has to be cleaned regularly with a vacuum cleaner to avoid blocking of
the air flow.
b. The positive/negative electrostatically charged 3M™ High Air Flow filter is recommended
to be changed every 3 months. Unusual dirt, construction work, pets, the presence of
smoke and running the air conditioning unit continuously can shorten the life time of the
3M™ High Air Flow filter.
c. The active carbon filter can be cleaned with a vacuum cleaner when dusty but has to be
changed at the same time as the 3M™ High Air Flow filter.
Filter installation
• Slide out the filter frame from the unit.
• Separate the filter fixer from the filter frame (see fig. 1).
• Remove the active carbon filter (black) and 3M™ High Air Flow filter from its plastic bag.
• Insert the active carbon filter into the filter frame (see fig. 2).
• Insert the 3M™ High Air Flow filter into the filter frame (see fig. 3).
• Fix the filter by reassembling the fixer into the filter frame (see fig. 4)
1
8
2 3 4