HermanMiller Mirra 2 Manual page 139

3. Slide the fl at head screw
driver into the slot and
depress the spring clip.
5. Rotate seat assembly
forward.
Z
© 2014 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y, Z, Mirra 2 are among the registered trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
4. Lift up the seat while
depressing the spring clip.
Repeat for the opposite side.
6. Using T40 torx bit remove
the retainer bolt. Repeat for
the other side.
Part no. 1BBT3M rev C.
139