Favorite; Additional Features - Bosch SMV6ZCX42N Instructions Manual

The product number (E-No.) and the
production number (FD) are required,
which you will find on the type plate on the
appliance door.

Favorite

Under the key
nation of a program and additional
function.
Save the program via the Home
Connect app or on the appliance.
The Pre-rinse program is stored
under this button at the factory. Pre-
rinse is suitable for all types of
crockery. The dishes are pre-cleaned
by cold rinse.
Tip: You can download additional
programs via the Home Connect app
and store them under the button.
Favorite save to the device
Open the appliance door.
1.
on
to press.
2.
Press the program button.
3.
→ "Programs", Page 21
Press the button for the desired
4.
additional function.
→
"Additional Features", Page 23
Press for 3 seconds.
5.
a The selected program and
the additional function will flash.
a
flashes.
a The program and the extra function
are stored.
Tip: To reset the program you can
use the Home Connect app or reset
the appliance to the factory setting.
→ "Overview of the basic settings
gen", Page 40
Depending on the device version
1
can you make a combi
1

Additional Features

Here you will find an overview of the
adjustable additional functions.
Depending on the configuration, various
additional functions are provided on the
control panel of the device.
Additional function
SpeedPerfect+
IntensiveZone
Extra Dry
Additional Features NL
Usage
s The duration depends on
depending on the
washing program by
15% to 75%.
s The water and energy
consumption are
high.
s With a mixed load
switch on the thing with
heavily and lightly soiled
crockery, e.g. heavily
load soiled pots and
pans in the lower
basket and normally
soiled crockery in the
upper basket.
s The spray pressure in the
third rack is raised
and the maximum
program temperature
ture longer
had. Because of this take
run time and energy
consumption.
s For an improved dry-
The final result is the
rinse temperature
increased and the
drying phase extended.
s Particularly suitable for
drying plastic
parts.
s The energy consumption is
slightly higher and the
maturity increases.
23