Table of Contents
Advertisement
Basic setting
TimeLight
Launcher
Signal strength
Key Volume
WiFi
Remote Start
Factory setting (may differ depending on the device type)
1
Display text
Choise
S:01
S:00 - S:01
1
SP:01
SP:00 - SP:01
1
SL:02
SL:00 -SL:03
1
bL:02
bL:00 - bL:03
1
Cn:00
Cn:00 - Cn:01
1
rc:01
rc:00 - rc:02
1
Basic settings NL
Description
Activate or deactivate
TimeLight.
During the program run, status
information about the time setting,
the program or the time remaining is
projected on the floor under the
appliance door. The display is not
visible with a pre-fitted plinth panel
or with a high installation with a
flush-fitting furniture front.
In position "S:00" the TimeLight is
switched off.
Set the default program when
the appliance is switched on.
s With the "SP:00" setting, the
switch on the appliance the
last selected program is
preset.
s With the "SP:01" setting, the
switching on the appliance
the Eco 50° program is preset.
Control the signal strength.
In position "SL:00" the sound
signal is switched off.
Set the key volume during
operation. In position "bL:00" the
key signals are switched off.
Enable or disable wireless network
connection.
The "Cn:00" position disables the
wireless network connection.
→
"Remote Start", Page 43
activate or deactivate. The
following settings are possible:
s With the setting "rc:00", the func-
tie permanently deactivated.
s With the setting "rc:01", the
function can be selected via the
key
.
→
"Remote Start
Page 43
s With the setting "rc:02", the func-
tie permanently activated.
activate",
41
Advertisement
Table of Contents
