Table of Contents
Advertisement
Display instructions
Malfunction
Indication of softening salt with- No softening-
fill is lit.
Indication of softening salt with- Water softening is off
filling does not light up.
Rinse aid refill
indicator lights up.
Rinse aid refill
indicator is not lit.
Malfunctions
Malfunction
Water remains in the
appliance at the end of
the program.
Device cannot be turned on- Software update is being performed
switched or operated.
The device does not start.
Cause
salt.
Sensor recognizes softening
salt tablets do not.
switched.
Rinse aid is missing.
Water softening is
switched off.
Cause
Sieve system or space below
the sieve is clogged.
Program has not yet
ended.
fed.
Device functions
have failed.
Fuse of the house
installation is not OK.
Power cord is not
connected.
Troubleshooting NL
To fix an issue
Fill in "softening salt" → Page 29
▶
Bee.
Do not use softening salt
▶
bleed.
Set water softening
▶
Fill the "rinse agent"
1.
→
Page 31 Bee.
Set the amount of rinse aid.
2.
→ "Amount of rinse aid
set", page 31
Amount of rinse aid in
▶
set.
To fix an issue
Clean the "seven" → Page 47.
1.
2.
Clean the "drain pump"
→
Page 62.
▶
Wait for the end of the program
or cancel the program with Reset
off.
→ "Abort program",
▶
Page 39
▶
Wait for the software update to be
completed.
Unplug the appliance from the
1.
mains socket or switch off the
fuse.
Wait at least 2 minutes.
2.
Connect the device to
3.
the mains.
Switch on the device.
4.
▶ Check the fuse of the house
installation.
Check that the socket is
1.
working.
59
Advertisement
Table of Contents
