Bosch SMV6ZCX49E User Manual
Hide thumbs Also See for SMV6ZCX49E:
Table of Contents

Advertisement

Quick Links

Dishwasher
SMV6ZCX49E
[en]
User manual

Advertisement

Table of Contents
loading

Summary of Contents for Bosch SMV6ZCX49E

  • Page 1 Dishwasher SMV6ZCX49E [en] User manual...
  • Page 2: Table Of Contents

    Table of contents Safety ..........   4 Etagere ........... 25 General information...... 4 Folding prongs ....... 25 Intended use........ 4 Extra Clean Zone ...... 25 Restriction on user group.... 4 Basket heights........ 26 Safe installation ........ 5 Before using for the first time ..   27 Safe use ........... 6 Performing the initial configura- Damaged appliance ...... 8 tion.......... 27...
  • Page 3 Customer Service......   59 Interrupting programme .... 36 Product number (E-Nr.), produc- Terminate programme.... 36 tion number (FD) and consecut- Switching off appliance .... 36 ive numbering (Z-Nr.) ..... 60 Basic settings........    37 AQUA-STOP guarantee .... 60 Overview of basic settings ..... 37 Technical specifications....   61 Changing basic settings.... 39 Information regarding Free and Open Source Software .... 61...
  • Page 4: Safety

    en Safety Safety Please read the safety information to ensure that you use the ap- pliance safely. General information You can find general information for this instruction manual here. ¡ Read this instruction manual carefully. Only this will ensure you use the appliance safely and efficiently. ¡...
  • Page 5: Safe Installation

    Safety en Keep children under the age of 8 years away from the appliance and power cable. Safe installation Follow these safety instructions when installing the appliance. WARNING ‒ Risk of injury! Improper installation may cause injury. ▶ When installing and connecting the appliance, follow the in- structions in the manual and installation instructions.
  • Page 6: Safe Use

    en Safety WARNING ‒ Risk of fire! It is dangerous to use an extended power cord and non-ap- proved adapters. ▶ Do not use extension cables or multiple socket strips. ▶ If the power cord is too short, contact Customer Service. ▶ Only use adapters approved by the manufacturer. WARNING ‒ Risk of injury! Hinges move when opening and closing the appliance door and can cause injury.
  • Page 7 Safety en ¡ Highly caustic alkaline or highly acidic cleaning agents in con- junction with aluminium parts in the interior of the appliance may cause explosions. ▶ Never use highly caustic alkaline or highly acidic cleaning agents, in particular commercial or industrial products, in conjunction with aluminium parts (e.g.
  • Page 8: Damaged Appliance

    en Safety ¡ If the insulation of the power cord is damaged, this is danger- ous. ▶ Never let the power cord come into contact with hot appli- ance parts or heat sources. ▶ Never let the power cord come into contact with sharp points or edges.
  • Page 9: Risk To Children

    Safety en Risk to children Follow the safety instructions if there are children in your home. WARNING ‒ Risk of suffocation! ¡ Children may put packaging material over their heads or wrap themselves up in it and suffocate. ▶ Keep packaging material away from children. ▶...
  • Page 10 en Safety WARNING ‒ Risk of injury! Children may get their fingers caught in the slots of the tablet collecting tray and injure themselves. ▶ Keep children away from the appliance when open. WARNING ‒ Risk of suffocation! Children may become trapped in the appliance and suffocate. ▶...
  • Page 11: Preventing Material Damage

    Preventing material damage en ¡ Modified or damaged water hoses Preventing material damage Preventing material dam- may result in material damage and damage to the appliance. Never kink, crush, modify or cut ▶ through water hoses. Follow these instructions to prevent Preventing material damage Only use the water hoses sup- material damage to your appliance,...
  • Page 12: Environmental Protection And Saving Energy

    en Environmental protection and saving energy ¡ Unsuitable cleaning agents may Change the sensor setting to the de- damage the appliance. fault. Do not use a steam cleaner. ▶ Consumption is reduced. So as not to scratch the finish ▶ → "Sensors", Page 13 on the appliance, do not use sponges with a rough surface or Zeolith drying automatically helps to...
  • Page 13: Aquasensor

    Installation and connection en AquaSensor Sensor setting Description ing low levels of active The AquaSensor is an optical meas- agents. Energy and water uring device (light barrier) which consumption are adjusted measures the turbidity of the rinsing accordingly. water. You can save water with the AquaSensor.
  • Page 14: Drainage Connection

    en Installation and connection walls. If you subsequently install your Also check that there is no cover dishwasher as a free-standing appli- in the drainage system preventing ance, you must stop it from tipping the wastewater from being dis- over, e.g. by screwing it to the wall or charged.
  • Page 15 Installation and connection en Insert the mains plug of the appli- ance into a nearby socket. The connection data for the appli- ance can be found on the rating plate. Check that the mains plug is inser- ted properly.
  • Page 16: Familiarising Yourself With Your Appliance

    en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarise yourself with the parts of your appliance. Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with "E number and FD number"...
  • Page 17: Controls

    Familiarising yourself with your appliance en "Detergent" → Page 31 is added to the detergent Detergent dispenser dispenser. "Bottom basket" → Page 24 Bottom basket Dispenser for special salt Add the special salt to the dispenser for special salt. → "Water softening system", Page 27 Lower spray arm The lower spray arm washes the tableware in the bot- tom basket.
  • Page 18 en Familiarising yourself with your appliance "Switching on the appliance" → Page 35 ON/OFF button and reset button "Switching off the appliance" → Page 36 "Terminating the programme" → Page 36 "Programmes" → Page 20 Programme buttons Display The display shows information about the remain- ing running time or the basic settings. You can change the basic settings via the display and the setting buttons.
  • Page 19 Familiarising yourself with your appliance en button If you press for approx. 3 seconds, you can open the basic settings. → "Changing basic settings", Page 39 Depending on the appliance specifications...
  • Page 20: Programmes

    en Programmes Programmes Programmes You can find an overview of the pro- ted. The running time will change if Programmes grammes that can be selected here. the rinse aid system is switched off Different programmes, which can be or rinse aid needs to be added. found on the control panel of your The consumption values can be appliance, are available depending...
  • Page 21 Programmes en Programme Programme sequence Additional func- tions Tableware: Reduced noise: → "Additional ¡ Cleaning mixed table- ¡ Pre-Rinse Silence 50 ware and cutlery. functions", ¡ Cleaning 50 °C Level of soiling: Page 22 ¡ Intermediate rinse ¡ Removing common ¡ Final rinse 35 °C household food remnants ¡...
  • Page 22: Information For Test Institutes

    en Additional functions flashes. Information for test institutes a The programme and the additional Test institutes are provided with in- function are saved. formation for comparability tests, e.g. Tip: To reset the programme, either according to EN60436. use the Home Connect app or reset These are the conditions for conduct- your appliance back to the factory ing the tests, however they are not...
  • Page 23: Features

    Features en Top basket Additional func- tion Arrange cups and glasses in the top ¡ Switch on with mixed basket. loads containing table- IntensiveZone ware with different soil- ing levels, e.g. place very soiled pots and pans in the bottom bas- ket and normally soiled tableware in the upper basket.
  • Page 24: Bottom Basket

    en Features Raise or lower the basket evenly to the right level. → "Basket heights", Page 26 Cutlery drawer Arrange cutlery in the cutlery drawer. Check that the basket is level on both sides. Slide the basket back in. Bottom basket Arrange pans and plates in the bot- tom basket.
  • Page 25: Etagere

    Features en Push the lever forwards and fold Etagere down the prongs ⁠ . Use the cutlery shelf and space un- derneath for small cups and glasses or for large items of cutlery, e.g. cooking spoons or serving cutlery. To use the prongs again, fold them back up.
  • Page 26: Basket Heights

    en Features Push in the top basket. Set the slider to ON. Clean under running water. Cleaning Extra Clean Zone Place the Extra Clean Zone in the Limescale and soiling from the dish- top basket and lock in place ⁠ . washing water can block the nozzles.
  • Page 27: Before Using For The First Time

    Before using for the first time en "Add rinse aid." → Page 30 Before using for the first time Before using for the "Switch on the appliance." first time → Page 35 "Setting the water softening sys- Configure the settings for initial start- Before using for the first time tem."...
  • Page 28: Setting The Water Softening System

    en Water softening system Note: Set the water hardness determ- ter hardness: the higher the water ined on your appliance. hardness, the greater the amount of special salt required. → "Setting the water softening sys- tem", Page 28 ATTENTION! With a water hardness of 0 - 8 °E ¡...
  • Page 29: Switching Off The Water Softening System

    Water softening system en Place the lid back on the dis- Regeneration of the water penser and turn to close. softening system Switching off the water In order to obtain fault-free function of the water softening system, the appli- softening system ance performs regeneration of the If you find the special salt refill indic- water softening system at regular in-...
  • Page 30: Rinse Aid System

    en Rinse aid system Spilled rinse aid can cause ex- Rinse aid system Rinse aid system cessive frothing during the wash cycle. You can use the rinse aid system Rinse aid system Close the lid of the dispenser for and rinse aid to get tableware and rinse aid.
  • Page 31: Detergent

    Detergent en Press ⁠ . Detergent Description To open the basic settings, press Tabs Tabs are suitable for all for 3 seconds. cleaning functions and do a The display shows H:xx. not need to be measured a The display shows ⁠ . out.
  • Page 32: Unsuitable Detergents

    en Detergent With powder and liquid detergent the Detergent Description dosage can be individually adjusted Detergent con- Chlorine residue on table- to the level of soiling of the table- taining chlorine ware may present a risk to ware. health. For better washing and drying results and to avoid damage to the appli- Information on detergents ance, please additionally use "Spe-...
  • Page 33: Tableware

    Tableware en Add the detergent to the dry deter- right dosage. In order to ensure gent dispenser. that tablets can dissolve evenly, do not place any other objects in the tablet collecting tray. 50 ml 25 ml Tip: If you use powder detergent and 15 ml select a program with pre-rinse, you can also add a little detergent to the...
  • Page 34: Arrange Tableware

    en Tableware ¡ For better washing and drying res- Cause Recommendation ults, position items with curves or Glass and tableware Only put glasses and recesses at an angle so the water was not dishwasher- china in the dish- can run off. safe.
  • Page 35: Removing Tableware

    Basic operation en Switching on the appliance Press ⁠ . ▶ The Eco 50° programme is set by default. The Eco 50° programme is an es- pecially environmentally friendly programme and ideal for normally soiled tableware. It is the most effi- cient programme for the combina- tion of energy/water consumption for this type of tableware and evid-...
  • Page 36: Setting Timer Programming

    en Basic operation will help prevent excess pressure Setting timer programming building up in the appliance and stop You can delay the start of the pro- the appliance door bursting open. gramme by up to 24 hours. Press ⁠ . Press ⁠   ⁠...
  • Page 37: Basic Settings

    Basic settings en Basic settings Basic settings You can configure the appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Display text Selection Description Water hardness H:04 H:00 - H:07 Set the water softening system to your water hardness.
  • Page 38 en Basic settings Basic setting Display text Selection Description EmotionLight EL:02 EL:00 - EL:02 Interior light. ¡ With the setting "EL:00"m the in- terior light is switched off. ¡ With the setting "EL:01", the in- terior light can be activated via the ON/OFF button.
  • Page 39: Changing Basic Settings

    Home Connect  en Basic setting Display text Selection Description Remote Start rc:01 rc:00 - rc:02 Activate or deactivate → "Remote Start ", Page 40. The following settings are possible: ¡ With the setting "rc:00", the func- tion is permanently deactivated. ¡ With the setting "rc:01", the func- tion can be selected via the button.
  • Page 40: Home Connect Quick Start

    en Home Connect Tips ¡ Please consult the documents sup- plied by Home Connect. ¡ Please also follow the instructions in the Home Connect app. Note: Please note the safety precau- tions in this instruction manual and make sure that they are also ob- Follow the instructions in the served when operating the appliance Home Connect app.
  • Page 41: Remote Diagnostics

    You can use this function to update the software of your appliance, e.g. Declaration of Conformity for optimisation, troubleshooting or safety-relevant updating. Robert Bosch Hausgeräte GmbH The Home Connect app informs you hereby declares that the appliance about available software updates. with Home Connect functionality...
  • Page 42: Cleaning And Servicing

    Dishwasher Care and Ma- ance to malfunction. To avoid such chine Cleaner for Dishwashers online faults and reduce odours, we recom- at https://www.bosch-home.com/ mend cleaning your appliance at reg- store or from customer service. ular intervals. Machine Care is a programme which...
  • Page 43: Filter System

    Cleaning and servicing en Phase Removal of Detergent Placement Food remnants and deposits Machine cleaner Detergent dispenser To ensure optimum cleaning perform- Remove any coarse soiling in the ance, the programme doses the de- interior with a damp cloth. tergents independently of each an- Clean the filters.
  • Page 44: Cleaning Spray Arms

    en Cleaning and servicing Cleaning filters Soiling in the dishwashing water may block the filters. After each wash check the filters for residue. Turn the coarse filter anticlockwise and remove the filter system ⁠ . Check that no foreign objects ‒ fall into the sump.
  • Page 45 Cleaning and servicing en Pull up the lower spray arm to re- move. Check the outlet nozzles on the spray arms for blockages under running water and remove any for- eign bodies. Insert the lower spray arm. a The spray arm clicks into position. Insert the upper spray arm and screw it firmly in place.
  • Page 46: Troubleshooting

    en Troubleshooting Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
  • Page 47 Troubleshooting en Fault Cause troubleshooting E:32-00 will light up altern- The filters in the water con- Switch off the appliance. ately or indicator for water nection of the supply or Pull out the mains plug. supply lights up. AquaStop hose are blocked. Turn off the water tap.
  • Page 48: Washing Results

    en Troubleshooting Fault Cause troubleshooting E:90-01 will light up altern- Mains voltage is too low. This is not a fault on the appliance. ately. Contact an electrician. Have the mains voltage and elec- trical installation checked by an electrician. A different error code ap- A technical fault is present.
  • Page 49 Troubleshooting en Fault Cause troubleshooting Tableware is not dry. The combined detergent Use rinse aid to improve drying per- used has a poor drying per- formance. formance. Use a different combined detergent with a better drying performance. Extra Dry not activated to im- Activate Extra Dry.
  • Page 50 en Troubleshooting Fault Cause troubleshooting Remnants of food on table- Tableware is placed too Arrange tableware with sufficient ware. close together or basket is space in between. overfilled. The spray jets must reach the sur- faces of the tableware. Avoid points of contact. Spray arm rotation is Arrange tableware so that it does ▶...
  • Page 51 Troubleshooting en Fault Cause troubleshooting Detergent residue in the ap- Tabs are used in the quick Select a more intensive "Pro- ▶ gramme" → Page 20 or use pliance or short programme. Dissolv- "Powder detergent" → Page 31. ing time of the tab is not at- tained.
  • Page 52 en Troubleshooting Fault Cause troubleshooting Stubborn white coatings are Too little detergent is being Increase the amount of detergent ▶ present on tableware, inside used. used or change "Detergent " → Page 31. the appliance or the door. Washing programme selec- Select a more intensive washing ▶...
  • Page 53 Troubleshooting en Fault Cause troubleshooting Coloured deposits (yellow, The formation of films is due Check the setting of the water orange, brown) that are easy to ingredients of food rem- softening system. to remove are present inside nants and tap water (limes- Add special salt.
  • Page 54 en Troubleshooting Fault Cause troubleshooting Irreversible clouding of Glasses are not dishwasher- Use dishwasher-proof glasses. ▶ glassware. proof, only suitable for dish- Glasses are usually only suitable for washers. use in a dishwasher, i.e. long-term wear or long-term changes must be expected.
  • Page 55: Home Connect Problem

    Troubleshooting en Home Connect problem Fault Cause troubleshooting Connection to home net- WLAN on router is not act- Check the wireless network con- ▶ work is not established. ive. nection of your router. WLAN display is flashing. Connection to home net- Activate the wireless network con- ▶...
  • Page 56: Mechanical Damage

    en Troubleshooting Fault Cause troubleshooting Appliance cannot be Appliance functions have Pull out the mains plug or switch off switched on or operated. failed. the fuse. Wait at least 2 minutes. Connect the appliance to the power supply. Switch the appliance on. Appliance does not start.
  • Page 57: Noise

    Troubleshooting en Fault Cause troubleshooting Lid on the detergent dis- Detergent dispenser or lid Remove detergent residue. ▶ penser cannot be closed. are blocked by sticky deter- gent residue. Noise Fault Cause troubleshooting Filling valves making knock- Caused by the domestic in- Can only be remedied in the do- ▶...
  • Page 58: Clean Wastewater Pump

    en Transportation, storage and disposal Clean wastewater pump Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. WARNING Risk of injury! Sharp and pointed objects or frag- ments of glass may block the waste a The pump cover clicks into posi-...
  • Page 59: Protect Appliance From Frost

    Customer Service en Protect appliance from frost Disposing of old appliance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely.
  • Page 60: Product Number (E-Nr.), Produc- Tion Number (Fd) And Consecut- Ive Numbering (Z-Nr.)

    en Customer Service We will always find an appropriate Product number (E-Nr.), pro- solution and try to avoid unnecessary duction number (FD) and con- visits being made by a Customer Ser- secutive numbering (Z-Nr.) vice technician. With any warranty claims, we will You can find the product number (E- make sure that your appliance is re- Nr.), the production number (FD) and...
  • Page 61: Technical Specifications

    Technical specifications en needs to be turned off if you are Capacity 14 place settings away from home for a long period, This product contains light sources e.g. on holiday for several weeks. from energy efficiency class G. These light sources are available as a spare part and should only be replaced by Technical specifications Technical specifications...
  • Page 62 en Technical specifications To file a request, please email to oss- request@bshg.com or send a written request to BSH Hausgeräte GmbH, Carl-Wery-Str. 34, D-81739 München, Germany. Reference "OSSREQUEST" The cost of performing your request will be charged to you. This offer is valid three years from the date of pur- chase or at least as long as we offer support and spare parts for the re-...
  • Page 64 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.

Table of Contents