NL Troubleshooting
Malfunction
The device does not start.
Program starts
automatically.
Device hangs in a
program or cuts out.
Mechanical damage
Malfunction
Appliance door cannot
be closed.
The lid of the detergent
dispenser cannot be
closed.
60
Cause
Appliance door is not
completely closed.
The program has not
ended.
Appliance door is not
completely closed.
Power and/or water supply
is interrupted.
The upper basket presses
against the inner door and
prevents the appliance door
from closing properly.
Cause
The door lock has
tripped.
Door blocked due to an
installation error.
Detergent dispenser or
lid are blocked by build-
up of detergent residue.
To fix an issue
Check whether the connecting cable is
2.
properly connected to the mains
socket and to the rear of the
appliance.
Close the appliance door.
▶
→ " abort program",
▶
Page 39
Close the appliance door.
▶
Check the power supply.
1.
Check the water supply.
2.
Check that the rear wall of
▶
the device is being pressed
by a socket or an
unassembled hose holder.
Arrange the crockery in such a way that
▶
no crockery parts protrude over
the crockery basket and prevent
the appliance door from closing
properly.
To fix an issue
Close the appliance door with more
▶
power.
Check whether the device is correctly
▶
is built-in.
The appliance door, door panel
or attachments must not hit
adjacent cupboards and the
worktop when closing.
Remove the detergent residue.
▶