Sharp HT-SB116 Operation Manual page 3

Sound bar home theater system
Table of Contents

Advertisement

Precaution
„ General
● Please ensure that the equipment
is positioned in a well ventilated
area and ensure that there is a
free space along the sides, top
and back of the equipment as
below.
10 cm (4")
● Use the sound bar on a firm, level
surface free from vibration.
● Keep
the
from
direct
magnetic fields, excessive dust,
humidity and electronic/electrical
equipment
facsimiles, etc.) which generate
electrical noise.
● Do not place anything on top of
the sound bar.
● Do not expose the sound bar to
moisture, to temperatures higher
than 60°C (140°F) or to extremely
low temperatures.
● If the sound bar does not work
properly, unplug and plug it in
again. Then turn it on.
● In case of an electrical storm,
unplug the sound bar for safety.
● Hold the AC power plug by the
head when removing it from the
wall socket, as pulling the lead
can damage internal wires.
10 cm (4")
sound
bar
sunlight,
strong
(home
computers,
● The AC power plug is used as
a disconnect device and shall
always remain readily operable.
● Do not remove the outer cover,
as this may result in electric
shock. Refer internal service
to your local SHARP service
facility.
● The
be impeded by covering the
ventilation openings with items,
such as newspapers, tablecloths,
curtains, etc.
● No naked flame sources, such as
away
lighted candles, should be placed
on the apparatus.
● Attention should be drawn to the
environmental aspects of battery
disposal.
● This sound bar should only be
used within the range of 5°C -
35°C (41°F - 95°F).
● The apparatus is designed for use
in moderate climates.
● SHARP is not responsible for
damage due to improper use.
Refer all servicing to a SHARP
authorised service centre.
● Do not use chemicals for cleaning
(benzine, thinner or alcohol). Also
do not allow volatile substances
such as insecticides, cosmetics
(perfumes, creams, sprays, etc.),
sunscreens, insect repellents, etc.
to adhere to the unit's surface. It
may damage the surface finish or
cause discolouration.
E-2
ventilation
should
not

Advertisement

Table of Contents
loading

Table of Contents