Sharp HT-SB116 Operation Manual page 17

General control (continued)
„ Volume control
● Press the + or – buttons on the
sound bar or remote control to
adjust the volume.
● If you wish to turn the sound off,
press the
control. Press the
or press the + or – buttons on the
sound bar or remote control to
resume normal listening.
● While adjusting the volume, each
time the + or – button is pressed,
the status indicator blinks 1 time.
● When the volume level reaches
its minimum or maximum level,
if + or – button is pressed again,
the status indicator blinks 3 times.
„ Muting (remote control)
If you wish to turn the sound off,
press the button on the remote
control. Press the
or press the + or – buttons on the
sound bar or remote control to
resume normal listening.
button on the remote
button again
button again
„ Select Equaliser (EQ)
effect
Press the EQ button on the remote
control repeatedly to select between
preset equalisers.
NEWS Magenta LED flashes in
2 seconds
MOVIE White LED flashes in 2
seconds
MUSIC Green LED flashes in 2
seconds
GAME Orange LED flashes in 2
seconds
„ Function selection
Press the
bar or remote control repeatedly
to select the desired mode. LED
indicator :
MAGENTA
BLUE
WHITE
GREEN
ORANGE
E-16
button on the sound
In USB mode
In Bluetooth mode
In HDMI mode
In Audio In mode
In Optical In mode