General control (continued)
Auto power on function
Auto power on function works only
during standby mode. It will not
work if the sound bar is in low power
consumption mode .
Optical In:
Turn off the external source. The
sound bar will automatically power
on if the external source is turned on
again.
Auto power off and auto
detect signal
The sound bar will automatically go
to standby mode if:
Optical In:
No audio signal is detected after
approximately 15 minutes.
Bluetooth:
Not connected condition, in the
pause
or
stop
incoming signal from device after
approximately 15 minutes.
USB:
In the stop mode or no USB device
is plugged in after approximately 15
minutes.
mode
and
no
Bass and treble control
(remote control)
Bass control:
1.
Press the BASS button.
2.
Within 5 seconds, press the + / -
button to adjust the bass.
Treble control:
1.
Press the TREBLE button.
2.
Within 5 seconds, press the + / -
button to adjust the treble.
E-18