Table of Contents
Advertisement
Bluetooth operation (continued)
1.
While in power on mode, press
the
button on the sound bar
or remote control repeatedly to
select Bluetooth mode. The blue
indicator will be blinking.
2.
Activate your Bluetooth device
and select the search mode. "HT-
SB116 SHARP" will appear on
your Bluetooth device list.
● If you cannot find the sound
bar, press the
sound bar or remote control
to be searchable. The blue
indicator will blink rapidly.
3.
Select "HT-SB116 SHARP" in
the pairing list. The system is
successfully connected when the
blue indicator lights up.
4.
Begin playing music from the
connected Bluetooth device.
To disconnect the Bluetooth function,
you can:
● Switch to another function on the
sound bar.
● Disable the Bluetooth function
on your device. The device is
successfully disconnected from
the sound bar when the blue
indicator blinks rapidly.
● Press the
bar or remote control.
button on the
button on the sound
Notes:
● Enter "0000" for the password if
necessary.
● If no other Bluetooth device pairs
with this sound bar in 2 minutes,
the sound bar will reconnect to
the previous connection.
● The sound bar will also be
disconnected when your device
is moved beyond the operational
range.
● If you want to reconnect your
device to this sound bar, place it
within the operational range.
● If the device is moved beyond
the operational range, when it is
brought back, please check if the
device is still connected to the
sound bar.
● If the connection is lost, follow the
instructions above to pair your
device to the sound bar again.
E-20
Advertisement
Table of Contents
