Table of Contents
Advertisement
Sound bar preparation (continued)
„ Installing the sound bar
1.
Mark two screw points on the
wall as below distance.
403 mm
2.
Make a hole on the wall
following
marks by using a drill.
1-1/4" (32 mm)
3/8"
(8-9 mm)
3.
Fix a wall mount plug into the
hole using a hammer, until it is
flushed with the wall surface.
1-1/4" (32 mm)
3/8"
(8-9 mm)
Ø5.5 ~ 6mm
32m
the
screw
point
Wall
surface
Wall
surface
4.
Fasten the screws to the wall
as shown below. (Total screw
is 2 pieces)
5.
Hang the sound bar onto the
screws.
E-9
Screw using
a screwdriver
Wall surface
4.5mm - 5mm
Gap from
wall surface
Advertisement
Table of Contents
