Table of Contents
Advertisement
5. Press the 0 key to Disable the HUD data communications.
6. Press the 1 key to Enable the HUD data communications.
7. Press the * key to abort or continue through the menus.
8. Press the 0 key to Disable the LCD display.
9. Press the 1 key to Enable the HUD display.
The following display is a 4 Channel unit.
The following display is an 8 Channel unit.
10. Press the 0 – 8 key to select the channel that will be displayed on the HUD.
11. Enter the Upper, target and lower values to be displayed on the bargraph.
96-005.doc
47650 CLIPPER DR. PLYMOUTH TWP., MICHIGAN 48170 (734) 414-6500
KEMKRAFT
MODEL KEI-095A BRAKE PEDAL TESTER (METRIC)
*** HUD OPTIONS ***
Numeric Disp. = OFF
0 = OFF
Press * to Abort
0 = Pedal Travel
1 = Deceleration
2 = Force
3 = Pressure
1,2,3,4 = Aux. Channel
5 = Pedal Travel
6 = Deceleration
7 = Force 8 = Pressure
Pedal Travel Setup
UPPER
TARGET xxxx.x
LOWER xxxx.x
ENGINEERING, INC.
1 = ON
xxxx.x
Page 9 of 16
Revised: 11-NOV-99
Advertisement
Table of Contents
