Table of Contents
Advertisement
10. When the fifth number is entered, the display will show the next recommended angle to be
entered.
11. The display will instruct the operator to set the angle transducers to the next negative angle.
The recommended angle is -45 degrees, however any angle from 0 to the previous angle
can be used. Set the transducers to the angle and enter the 5 digits of the angle (45.000) on
the keyboard or select * if the displayed angle is correct to continue.
12. When the fifth number is entered, the display will go show the next recommended angle to
be entered.
13. The display will instruct the operator to set the angle transducers to the next negative angle.
The next recommended angle is -30 degrees, however any angle from 0 to the previous
angle can be used. Set the transducers to the angle and enter the 5 digits of the angle
(30.000) on the keyboard or select * if the displayed angle is correct to continue.
14. The display will instruct the operator to set the angle transducers to the next negative angle.
The next recommended angle is -15 degrees, however any angle from 0 to the previous
angle can be used. Set the transducers to the angle and enter the 5 digits of the angle
(15.000) on the keyboard or select * if the displayed angle is correct to continue.
15. The display will instruct the operator to set the angle transducers to zero angle. The
recommended angle is 0 degrees, however any angle from the previous angle to the next
angle can be used. Set the transducers to the zero angle and enter the 5 digits of the angle
(00.000) on the keyboard or select * if the displayed angle is correct to continue.
16. The display will instruct the operator to set the angle transducers to the first positive angle.
The recommended angle is 15 degrees, however any angle from 0 to 99.999 can be used.
Set the transducers to the angle and enter the 5 digits of the angle (15.000) on the keyboard
or select * if the displayed angle is correct to continue.
17. The display will instruct the operator to set the angle transducers to the next positive angle.
The recommended angle is 30 degrees, however any angle greater than the previous angle
can be used. Set the transducers to the angle and enter the 5 digits of the angle (30.000) on
the keyboard or select * if the displayed angle is correct to continue.
18. The display will instruct the operator to set the angle transducers to the next positive angle.
The recommended angle is 45 degrees, however any angle greater than the previous angle
can be used. Set the transducers to the angle and enter the 5 digits of the angle (45.000) on
the keyboard or select * if the displayed angle is correct to continue.
19. The display will instruct the operator to set the angle transducers to the last positive angle.
The recommended angle is 60 degrees, however any angle greater than the previous angle
96-005.doc
47650 CLIPPER DR. PLYMOUTH TWP., MICHIGAN 48170 (734) 414-6500
KEMKRAFT
MODEL KEI-095A BRAKE PEDAL TESTER (METRIC)
ENGINEERING, INC.
Page 12 of 16
Revised: 11-NOV-99
Advertisement
Table of Contents
