Pure Clean PUCRC675 User Manual page 30

FAULTS
Remote
control
malfunctions
(e ective
range is 5 m)
When the
robot is
working,
there is a
missed
sweep, the
route is
chaotic, the
deviation
is reversed,
and the APP
side cleaning
map shows
irregularities
and is not
neat.
30
www.PyleUSA.com
POSSIBLE REASONS
The remote controller is short
of or out of power.
The robot is short of or out
of power.
The infrared ray is blocked
because the infrared emitter
on the remotecontroller or
the infrared receiver in the
robot is contaminated.
Interference emitted by other
devices that exist nearby.
The drive wheel and the
ground may slip due to the
robot climbing small steps,
thresholds and door bars, thus
a ecting the its judgment on
the working environment of
the whole house.
Work on a waxed, polished
oor or smooth oortile,
resulting in reduced friction
between the drive wheel and
the ground.
The wires, slippers, etc.
placed on the ground a ect
the normal operation of the
robot.
SOLUTIONS
Change the batteries and
install the batteries correctly.
Make sure that the robot is
switched on with enough
power for operation
Wipe the infrared emitter on
the remote controller or the
infrared receiver on the robot
with a clean cotton cloth.
Avoid using the remote
controller near other infrared
devices
It is recommended to close
the door in the area and clean
the area separately. The robot
has the function of self-
identi cation single room.
It will return to the starting.
It is recommended that you
clean the oor after the wax
is air-dried.
Before the machine is working,
please arrange the scattered
wires, slippers and other
objects on the ground to
minimize the scattered
objects on the ground.