Pure Clean PUCRC675 User Manual page 7

Smart vacuum cleaner, automatic robot cleaning vacuum, auto charge docking station
Table of Contents

Advertisement

ATTENTION
1. lf abnormal overheating is discovered during charging, stop using it
immediately to avoid leakage, heating or rupture.
2. To prolong the service life of the battery, please remove the battery
and place it in a cool, dry environment if it is out of service for a long
time; this will avoid leakage, heating or rupture.
3. Do not soak it in water or let it come into contact with any liquid;
otherwise it may cause leakage, heating or rupture.
4. Be sure to stop using it immediately in case of any exception
(e.g. discoloration or deformation), to avoid leakage, heating or rupture.
5. Always use tape to insulate the battery's electrode when recycling or
disposing of it.
WARNING
1. When skin or clothing is exposed to the battery electrolyte, immediately
wash with clean water to avoid in ammation of skin, etc.
2. Do not use the rechargeable battery on other devices. This battery is
only suitable for smart sweeping robots.
3. If the battery's outer box is found to be deformed and expanded, or
leakage of electrolytes is found, do not charge or continue to use to
avoid danger.
4. Do not throw or in ict a strong impact on the battery; doing so may
cause leakage, heating or rupture.
5. Do not disassemble the battery pack; doing so may cause battery
rupture and electrolyte out ow, leading to re, explosion and other
dangers.
6. How to remove the battery:
1. Take out two screws on the battery cover with a screw driver.
2. Take out the battery cover.
3. Take out the battery and unplug the electric wires to remove the battery.
www.PyleUSA.com
7

Advertisement

Table of Contents
loading

Table of Contents